By 
Because the bulb is so deeply recessed, many people wonder how to remove it. Some people become afraid and think they can’t remove the bulb alone. Light bulbs are an integral part of many homes. They can be found in every room, from the living room to the kitchen. A stuck light bulb is something that almost all homeowners will encounter. It is difficult to remove the bulb by hand.
How to remove a stuck light bulb recessed?
Most cases of corrosion cause the light bulb to become stuck or recessed. Corrosion can occur between the socket’s metal base and the bulb. The bulb can also become stuck in the base if it is subject to power surges.
Tips to Remove a Stuck Light Bulb recessed
1) The use of the duct tape
The multi-purpose utility of duct tape in your home is unbeatable. It is most commonly used to seal cartons and parts of cars. It will always be in your toolbox. It can be used to remove a stuck or recessed light bulb.
Simple steps to follow when you use duct tape
a) Wait for the bulb to cool down. It may take up to five minutes. It can take up to 20 minutes if it is a Halogen bulb. It is dangerous to touch the bulb while it is hot. You must ensure that the main switch is turned off.
b) Use scissors to cut a piece of duct tape. The length of the strip should be approximately 30 cm (12 inches).
c) Carefully fold each end of the duct tape. Wrap the duct tape in circular shapes if you can. You can make the circle large enough to fit your hand.
d) Stick the tape to the light bulb. Then press the sticky side of the tape onto the flat surface of the recessed light bulb.
e) Use your hand to twist the bulb. It is easy to remove duct tape stuck to the bulb.
f) Use your hands to continue unscrewing the light bulb. Remove the duct tape once you are able to grip the sides of your light bulb. You will now be able spin the bulb with your naked hands.
g) Use the same process to replace the bulb. Begin by fixing the bulb with your hands. Once the light bulb is flushed, attach the tape to the back and turn it to secure the fit.
2) Take a small piece of potato.
Everybody knows what a potato looks like. It is a staple food that should be in every home. It is an ancient method of removing a stuck lightbulb. Many people would be curious to know how a potato can take out a stuck lightbulb. These simple steps will help you to remove a stuck bulb using a potato.
i. Turn off the switch. This prevents the possibility of an electrical shock.
ii. Keep your eyes protected and safety gloves on in case the bulb bursts.
iii. Cut the potato in half.
iv. Wrap it around the bulb to release the heat and turn it clockwise.
v. The bulb will then come out quickly and you can replace it with a new one.
3) Use an pair of pliers
A pair of pliers is the best way to remove stuck light bulbs. The needle-nose pair of pliers is used to remove the bulb from the socket. Avoid bending the bulb. It could cause damage to your eyes and even your hands.
These are the steps to take when you use the plier’s technique
a) Use the pliers to grasp the base of your light bulb.
b) Turn it in an anti-clockwise direction, to unscrew the bulb.
c) This would allow the bulb to loosen up.
d) Now, spin the bulb with your hands to take it out.
e) To prevent another similar incident from happening, replace the bulb and apply a lubricant to the base.
Comments