By The EPC Light on your Audi and the shaking of the vehicle can be an incredibly frightening experience.
It’s not good. This article will discuss the most common reasons for the EPC Light coming on and how to fix it.
What is the EPC light on an Audi?
The EPC light is “Electronic Power Control.” It’s similar to the check engine light, but it focuses more on your vehicle’s throttle system.
This light will illuminate if there is an issue with the powertrain control module of your Audi.
Your Audi will go into limp mode if your engine is misfiring. This causes the vehicle to shake and be rough while driving.
What causes your Audi to shake? Why does the EPC light come on?
After I’ve briefly explained the EPC light and its purpose, let’s talk about some of the most common reasons why this light comes on.
The EPC light could come on for a number of reasons.
Here are some of the most common problems I have seen as a mechanic. They are listed in ascending order of prevalence.
The Throttle Body is Bad or Failing
The throttle body is an important component of the engine in your vehicle.
It is essential for controlling the amount of air entering your engine. Without it, your car would be unable to start or run correctly.
If there is a problem with your throttle, such as a faulty connection or sensor, the EPC will come on, and your Audi will shake.
Bad Ignition coil
The ignition coil, which is located above the spark plugs on your engine, produces high-voltage electricity.
The electrical charge ignites the mixture of fuel and air inside your engine.
The EPC light can come on if one of your coils is not working properly. This can lead to problems like stalling and misfires.
Injectors clogged or faulty.
The injector is a small device that sprays fuel into your engine’s combustion chamber.
This can lead to engine misfires, engine stalls, and rough idling if one of them becomes clogged.
Fuel injectors are not designed to last forever and will need to be changed eventually.
The third most common reason for the electronic power control lamp to come on in an Audi is a bad fuel injector.
Spark plugs that are not working properly
Spark plugs can also be a cause of the powertrain lights.
Your spark plugs will not be able to create the high-voltage spark required to ignite the mixture of air and fuel inside your engine if they are worn out.
Audi spark plugs need to be changed every 48 000-64 000 km (30 000-40000 miles), depending on your model year.
It’s possible that your spark plugs are worn and in need of replacement if you don’t change them regularly.
How to fix the EPC light on an Audi
Let’s finally look at how you can fix the EPC on an Audi.
The EPC warning light can be caused by a number of things. First, I would recommend scanning the vehicle to find out the fault codes.
You can do this yourself by using an OBD scanner, or you can take your car to a mechanic to have it done for you.
You can scan your Audi to find out what’s causing the EPC and shaking. If the scanner displays codes related to the throttle, you should check the throttle.
If you receive a cylinder misfire code, then it is likely that your ignition coils or plugs are to blame. However, if you receive fuel-related codes, then you may have a problem with your injectors.
You’ll be able to fix the problem once you know what it is. You can repair a simple problem like a bad vacuum or spark plug, but for more complex problems, I would recommend going to an Audi dealer.
Comments