Common carpet maintenance mistakes that you should always avoid!

Carpets are always a great purchase for any household and certainly one you can invest in. The only issue is that you need to take proper care and maintenance of your carpets to last the long haul. And that includes cleaning it properly and avoiding rookie mistakes which can mar the look and even impact the fibers. As you well know, whether you have an ancient Turkish carpet or a modern rendition, it would be composed chiefly of interwoven fibers in intricate patterns. And as such, it is bound to accumulate dust and particles, so you need to clean it up regularly. Again, review the post for more information.

Not vacuuming it regularly: As mentioned earlier, your carpet can accumulate dust, even in short periods. The dust particles are liable to settle in between the fibers and spoil the final appearance. And that’s why you must clean up your carpets, at least once a week.

Here’s what you can do – you can go ahead and deep clean your carpet with a vacuum cleaner. And even use the deep-clean setting to clean the carpet thoroughly and suck all the dust particles out. Granted that this depends more on the sort of vacuum cleaner you have at the moment. But if it comes with the required accessories and the deep-clean setting, you should be able to give your carpet a real good cleaning,

You need not even check out carpet cleaning in Auckland, but use your vacuum cleaner to deep clean your carpets, and that should do the trick effectively. And remember, you would not have to wash the carpet often either, making it last longer.

Do not rub the stain: If you get a stain or a grease mark on your carpet, one of the worst mistakes you would make is to rub it. You must have heard all those old myths that tell you to rub the stain or the grease mark vigorously until it disappears completely, right? The problem with that idea is that you push the stain or the grease mark deeper into the carpet fibers. And in the process, you would find it next to impossible to remove it.

Removing a stain or a grease mark is to blot it out gently. Once you have removed all the excess liquid from the carpet, you can now use a mix of a gentle dishwashing detergent, along with water, and let it sit on the target area for a while. After which, you can blot it away and dry it up with a clean tissue, and the stain should be gone.

Letting the stain sit longer: This is one of the worst mistakes you could make as a carpet owner. When it comes to stains or grease marks, you need to take immediate action. And by delaying, you are enabling the stain to set in deeper, among the carpet fibers. Translated: that means it will be harder to remove.

When you get a stain on your carpet, use a blotter and gently blot up the stain. And it would be best if you took immediate action, such as gently rubbing a dishwashing detergent and some water on the area. Let it sit for a while, after which you can gently blot it out. And now, your carpet should be perfect without any stains on it,

Never use abrasive cleaning agents: When it comes to carpets, especially antiques – you need to be extremely careful when cleaning them. Remember that these are composed mostly of ancient fibers, and you need to handle them gently.

And one of the worst mistakes you could make with an antiquated carpet is to use abrasive cleaning agents. These detergents are toxic to the carpet and the underlying fibers. In addition, they are bound to damage it permanently, so you always use only soft detergents when cleaning your carpets.

And these are some of the mistakes that you need to avoid when it comes to taking care of your carpets!