By 
In the modern-day & age, serpentine belts inside cars have become almost non-existent. This is because automatic belt tensioners have taken their place and are far more efficient at what they do. However, if you have an old or a classic vehicle and you want to change your car’s serpentine belt, then you’ve arrived at the correct place.
Therefore, in this in-depth guide, we’ll be sharing the relevant instructions that you need to follow to be able to swap your car’s serpentine belt in almost fifteen minutes. So, without wasting any more precious moments, let’s jump right in.
Methods To Follow When Changing The Serpentine Belt Of Your Vehicle
- Checking The Tensioner Arm
According to professional services for damaged cars for sale in Sydney, the first step that should be undertaken would be to ensure that the tensioner is at its correct place before you think of swapping the serpentine belt. Usually, a good tensioner arm should be able to offer a slight amount of vibration and the belt will be able to move smoothly.
If the same isn’t reflected in your tensioner arm, then the tensioner must be replaced at first before going ahead with the serpentine belt.
- Checking The Serpentine Belt
Over time, serpentine belts crack with usage. So, if you’ve got more than three or four cracks in your serpentine belt, then you should look forward to replacing the same. Moreover, any of the below-mentioned defects will also point towards a replacement procedure:
- Frayed or torn fabric
- Debris trapped in the belt
In case you don’t find cracks in your serpentine belt, then proceed to look for the overall wear & tear of the belt, which will give you a good idea of whether it needs replacing.
- Obtaining The Correct Equipment & The Replacement Process
If you’re planning to go the DIY route, then you must know that standard vehicle tools are sufficient to change the serpentine belt of your car. Start off the process by removing the belt, first & foremost. Once you’ve removed the old belt, it’s time to put in the new one using the belt placement tool. Follow the same path as you had done with the removal process.
When installing your new serpentine belt, ensure that the belt is aligned perfectly with the pulleys and it has followed the proper path in the installation procedure. Slowly release the tensioner once you’re done with the installation.
And that’s how you change a car’s serpentine belt. We hope you enjoyed our step-by-step guide on the same and if you have any additional queries, be sure to let us know. We’d be happy to help.
Comments