5 Tips on How to Extend the Life of Your Commercial Machineries!

A running business demands the proper running of each sector of the industry. Whether it’s the human resource or the factory equipment, all need equal amount of attention to ensure that the regular cycle of work goes on perfectly, especially on the machines and equipment. You tend to invest loads to get that heavy and expensive equipment for your company so that the work in your factory runs well and without any pauses. But what if one part of the machines gets worn out? Or if the entire machinery shows some huge issue? This would mean spending of thousands in its repair. Even more if you need to replace it! And not to forget the amount of work being undone because of this malfunction. Attending this issue is as important as keeping the work going on in an industry. In short, extending the life of your machines is essential for your business to run longer and perfectly.   

How can you Increase the Longevity of your Commercial Equipment?

A long life of a machine ensures that you have to spend less on its repair and re-buying. Also, this means your production process goes seamless and hence better profits are achieved through it. This marks the importance of the procedures that can help increase its life. Below are some of the ways through which you can enhance the performance of your commercial equipment and increase their life too:

• Proper lubrication— All the heavy equipment and machines in an industry depend upon their lubricants in granting better performances. If the machines aren’t oiled properly, they tend to wear easily and will soon make weird noises and even slow down wiith time. This will eventually lead to the machine giving up entirely. On the contrary, if you oil the machines regularly, it decreases the friction of the machine parts and increases its swiftness. This enhances the machine’s performance, leads to better functionality and also increases its life. Always make sure that you check for the best lubricants for your machines as prescribed by the manufacturer, use them at the required level and keep checking for the rusts and soil build up that can be dealt with only by greasing and lubricating.

• Cleaning Machines Thoroughly —Thorough cleaning is the basic procedure that can increase the life of your machines. A machine consists of various hidden tiny particles that are impossible to be cleaned by just a regular dusting or vacuuming. This demands a more thorough and deep cleaning method in the industrial zone. Also, dust particles and dirt can eventually clog the exhaust fans, filters and seals of your machines, thereby hindering their proper work. This can increase with time, and slowly leads to wearing out of the machine at an early stage. To keep your machines intact for long, keep it clean by calling professionals who are expert in commercial cleaning in Dandenong. The Key Job Professionals are really exceptional in thorough cleaning of your commercial equipment, making sure that everything is cleaned in the manner specifically suited for the same. Each machine has a different guideline for cleaning and maintenance – professionals are aware of the same, ensuring that the cleaning process does not damage your equipment in any way. Make sure to follow up this cleaning process at regular intervals for better benefits.

• Keep a Regular Check on Machine’s Parts — A machine and commercial equipment can be really complex. Checking each and every part and proper working thereof cannot be possible by you alone. You can either call for the services of the manufacturing company at a proper time interval to keep a close check on its parts, or you can even hire workers who have ample amount of knowledge about these parts.

• Avoid Over Usage of the Machines —Everything works best if it’s used in a certain limit. Overdoing can often lead to early wearing of the machines and the machines giving trouble at shorter intervals. To avoid this, always use the machines in their limits and keep some good gap before turning it on work again. This gives the machines ample time to cool down, and leads to its parts working swiftly again. Also, check the manufacturer’s manual to study your machines’ best performance time span and use it accordingly.

• Train your Employees — The employees handling the machineries and equipment are largely responsible for its longevity too. If they don’t know when to stop a certain machine, or what does overheating of a part leads to, or what danger can a non-working exhaust fan cause, they aren’t going to manage the same properly. They wouldn’t be having any knowledge on assessing the same properly, and this can cause a huge loss to you. Therefore, training your employees to use the equipment well is necessary for its longer life, and also for your workflow to go on smoothly.

It’s unfortunate that most of the companies, even being aware of the big loss that they may have to face if the above points are not followed, tend to give very little thought on all these matters. But the fact is, heavy machines require a substantial investment and that’s why they call for better management, deeper cleaning and proper handling for its longevity and healthy working time.