By 
Every homeowner’s worst fear is water damage. It can happen to anyone. When it happens, you must know what to do.
We provide comprehensive water damages cleanup services to restore water damage homes, businesses and other buildings every day.
This blog contains our best water damage repair tips. They will help you to deal with structural damage and mold no matter how serious the situation may be.
Before You Start, Do This:
Choose whether you’ll do the repairs yourself or call in the pros
Water damage is a serious problem.
All water damage cannot be repaired by yourself.
You’ll need a professional water damage restoration services in Wellington company to restore your home if the damage is extensive.
Even minor damage can hide serious problems. For example, mold or mildew in your home, or damage to the building materials.
We recommend that you call in professionals to handle any water damage, no matter how minor it may appear.
It’s best to hire a professional to assess the damage and make sure there is no more.
Safety gear: Get yours now
It’s important to be prepared for safety if you choose to do the water damage clean-up yourself.
As you enter and assess the affected area, wear protective gear such as a face mask and waterproof boots.
What You Need To Know About Water Damage Cleanup
Are you ready to deal with your home’s flooding?
Here are some tips on how to restore your home and return to normal.
1. Shut off the water at the source
You’ll first need to stop water at its source.
It will also help to limit damage caused by water.
Find the main water line in your home and shut it off.
The leak should be stopped in its tracks.
If you cannot stop the leak, call an emergency plumber immediately.
2. Switch off the electrical supply to your home
Standing water in your home can be a significant danger to electricity. When exposed to water, any exposed cables or wiring can pose a deadly risk.
Turn off your electricity before you enter water-damaged areas.
Have your electronic devices, such as your TV or appliances, serviced by professionals before you start them up again.
3. Find the source of a leak
You’ll then need to determine the cause of the leak and where the damage is coming from.
Keep in mind there are three types of water damage. Each has its own level of contamination.
- Water damage in Category 1 is clean and can be dealt with safely as long as immediate action is taken. This water does not contain raw sewage, or any other harmful contaminants.
- Water is considered to be ” graywater”. This water can cause illness or discomfort due to its high level of contamination.
- Water can also be called “black water” because it is highly contaminated by pathogens and toxins.
This lens will help you to identify the source of your leak.
If your sink overflowed you are likely dealing with water damage of category one, which is something you can probably fix on your own.
It’s a category three water loss if you have raw sewage backing up in your crawlspace. This requires immediate professional attention.
4. Mold can be detected by looking for certain signs
Within 24 to 48 hours after exposure to water, mold and mildew may begin growing.
Mold must be checked as soon as you can after an event of water damage. You can look for signs such as discoloration, or a musty odor.
You can deal with mold by cutting out the area, putting it in a bag, and throwing it out.
A professional restoration company will be needed for larger mold patches.
5. Take care of your valuables
Move valuables to a safer area if they have not been damaged by water.
If the water is not contaminated, personal belongings such as electronics, furniture and appliances can still be saved.
6. Removing damaged items
You may need to get rid of porous materials that have been damaged by moisture.
Prioritise the ceiling and floor when you are assessing your possessions. To prepare the house for water damage repairs, all unsealed drywall and cement will need to replaced.
7. Clean the area
The next step is to begin the cleanup and mitigation. You can remove standing water using a wet/dry vacuum.
After all the standing water has been removed, use a towel and an absorbent mop.
Use fans and dehumidifiers once all visible signs of moisture have disappeared to remove any excess water. Open the doors and windows in your house to encourage air flow and speed up the drying process.
8. Disinfecting the area
You’ll then need to disinfect the affected area using a water/bleach mixture. If your ceilings or walls or flooring are damaged, contact a contractor or company that specializes in water damage restoration to get complete remediation.
9. Contact trusted water restoration company
We’ve already mentioned that contacting a professional water damage restoration company is a crucial part of the water damage repair process.
A water damage restoration company can spot hidden damage, which may need to be addressed to avoid future problems.
We will help you restore your property to its original condition by evaluating it.
Comments