10 Water Heater Repair Tips You Should Know About

Water heaters play a silent but important role in everyday life. After a long, tiring day we all deserve to take a hot shower. Nobody wants their water heater to malfunction.

Imagine feeling the cold water instead of hot on your skin as you stand in front of a shower. Here are some water geyser repairs that you can do yourself, without having to call a plumber.

Water heater repair can be difficult. We don’t need to keep calling the plumber to service our hot water cylinder. Instead, we can consider hot water cylinder repair services in Hamilton to help with any issues. Additionally, we can avoid the chaos by following some quick and easy steps that are guaranteed to prevent water geyser repairs.

Water Heater Repair: Common Problems

1. No hot water

If you have no hot water, it is likely that your water heater has serious problems. You should repair the water heater as soon as possible.

2. Little hot water

It’s not a good idea to ignore this. You should repair the heater if you feel that it is not heating enough water. This could result in no hot water.

3. Leaks

It is important to not ignore drips, sprays or rust from the water heater.

4. Smelly water

The bad smell is caused by bacteria that grows on the sediment in the tank. As soon as you notice a bad smell, drain and clean the tank.

5. Unusual sounds

It is not normal to hear loud pops. They can be a sign that the sediment has been ripped apart. Ask a plumber to examine any strange sound you hear. It could be dangerous.

What To Do When The Water Stinks?

Anode rods or bacterial decomposition are the main causes of the bad smell. It is easy to get rid of the smell. If the smell persists, clean the tank gently with a hydrogen peroxide solution diluted.

Water Heater Repair Tips

1. Install heater to a sufficient height: According experts, water heaters should be installed a minimum of 1.8 meters (6 feet) above the ground. It increases the water pressure and gives you warm water.
2. Drain your water heater: When draining the heater, collect the water and you’ll see it’s full of sediments. The sediment can cause serious problems if the water heater isn’t drained quickly.
3. Check the pressure relief: Another water heater maintenance tip would be to check the pressure release valve or thermostatic mix for obstructions. This could help determine if there is a problem with the heater. Check the pressure at least once a year in order to prevent major damage.
4. Monitor the water temperature: You should monitor water temperature periodically. The temperature of the hot water should be no higher than 125 degrees.
5. Pay attention to the exhaust stack: You must check the connections and ensure that there are no leaks. If there is any rust, corrosion or deterioration, you should also take care of it, as it can cause problems in the future.
6. The old is not always the gold: Your water heater should be replaced if it is older than 10 years. The technology of today is far superior to a 10-year-old water heater, so it’s best to replace it. It will be more efficient. A new water heater is also more energy efficient than an old one.
7. Check the insulation: You should check the insulation surrounding the unit every few months. Water heaters should be insulated, especially if they are older. The unit will run less, lowering the electric bill. It also keeps the water warm.
8. Electrical connections and wiring: Ensure that the water heater’s wiring is connected to a Miniature circuit breaker (MCB), which will cut off the power if it is unstable.
9. Annual maintenance: To prevent major water heater problems, ensure you have regular annual checks. The problem can be easily rectified if it is discovered at the beginning of the water heater service.
10. Lower the temperature: Lowering temperature not only will save electricity, but will also increase the life of the geyser as it will reach the desired temperatures faster. Warm water is less likely to cause accidental burns than hot water.

Electric heaters can be used if you are looking for an eco-friendly option. Tankless water heaters heat the water only as needed and do not run continuously. This is a great way to conserve electricity.