By 
We all want to make our homes look new and happy. Painting your home is a must. Have you surveyed the house? Do you know where moisture has already gotten in and left its mark, or do you suspect that there is seepage occurring? If not, do it. Contact a home inspector. If you already know about the leakage, seepage, and dampness but still don’t consider treating them before painting be prepared to spend a lot on acrylic distempers and emulsions.
Paint companies only recently began to inform you about the weather’s effects on your home and how the right paint could prevent damage. Do you think about the color of your walls as much as what shade to select? No. You need to be more vigilant and check for visible signs of dampness in your walls. Paint on damaged walls will make them look nice, but they are at risk of further damage.
Contrary to common belief, putty or paint cannot fix dampness permanently. We must conduct an in-depth damp assessment, with the assistance of home inspectors, before deciding on a solution. The first step in treating damp is to repair the leak.
Prior To Painting Your House, Treat Dampness At Its Source.
1. Repair plumbing faults
Leakage from water pipes can cause water to leak onto the adjacent walls. Leakage in the pipes of the bathroom or kitchen can dampen the walls below. You must conduct a thorough inspection of your home and inspect all fittings and pipes. Leakages can occur both in the external and internal piping, as well as the tank itself. Repair any leaks immediately if you discover them.
2. Check indoor moisture content
The climate of a location is important in determining how your home will look. In India, the humidity level is always constant. Check the moisture level in your home to ensure it doesn’t exceed the normal range. Take the necessary steps to prevent damp walls and ceilings by ventilating your rooms.
3. You may have damp or a leaky pipe in the flat next door. Alert your neighbour.
Ask the neighbours who share walls or floors with you to check their kitchen and bathrooms for leaks. If your home inspection shows no obvious problem, but you see watery spots on your ceiling or bulging tiles along the bathroom walls and you are still concerned about dampness in your home, you can ask your neighbours to check for leakage. The dampness in your home will be resolved once the issue is fixed.
4. Check the condition of your building’s external
The chances of dampness occurring in the interior walls of your home are greatly reduced if the outer walls of the building are in good condition. Exterior walls are protected from moisture and rainwater by using weather-shielding paint and plastering. If the quality of the plastering is poor or the paint old, it will lead to damp and moisture absorption.
5. Roof leakage is a common problem.
The accumulation of water on the roof can be a problem. After rain, a blockage in the vents may cause a large amount of water to accumulate on the roof. Water may seep into the ceiling through your roof. Cracks in the roof or damaged waterproofing are other possible causes.
If you have a roof with blocked outlets, clear them out. You can also repair any cracks that are found through an inspection of your home. You may need to waterproof the roof or build a roof shed in order to prevent water accumulation.
6. Close all other sources of moisture intrusion
There could be more sources of moisture intrusion than those listed above. Then, paint your home to prevent moisture intrusion.
How To Avoid Damp Paint When Painting
Paints of high quality are recommended
Paints can do much more than just enhance the appearance of your home. Paint solutions that are advanced include silicon technology, for example. They do not absorb any moisture and stop water from seeping through walls. For the best results, choose a weather-guard variety of paint for exterior walls as well as an equally good solution on the interior walls. Consult a professional to help you choose the right paint and Painter in Highland Park.
Certain paints have antimicrobial properties that are also proven. The action of these paint solutions reduces the growth of microbes and fungi on damp walls. It is important to do this because dampness can cause many ailments, including allergic rhinitis and skin rashes. Use these paints to create a beautiful, healthier home.
Waterproofing your walls
It is essential to waterproof your walls to strengthen them from the inside and to treat dampness and seepage. Ensure that your ceilings and walls are both waterproof. You will be responsible for this. Calculate your budget by knowing the requirements well in advance. Consult with whom? Who else but a home inspection service provider?
How to paint correctly
Paint or putty will not solve the dampness problem. You should only apply paint after priming to effectively slow or prevent dampness. You must first apply anti-dampness chemicals such as Dr.Fixit2 and Asian Paints Care Dampproofing3 to the walls. Follow the manufacturer’s instructions.
Comments