By 
In case you’re planning to perform DIY drywalling, then obtaining the ideal tools for the task is extremely necessary, especially when you have little to no experience in the field. However, the good news is that – several automatic drywalling tools are specifically made to make your job simpler & easier. And one of those tools is the drywall flat box.
So, what is a drywall flat box, and for what purpose is it used? Let’s find out.
What Do You Mean By A Drywall Flat Box?
According to a reliable GIB stopper in Auckland, when you’ve completed installing your drywall, it’s extremely essential to cover the joints between two plasterboards with a special joint compound along with plastering tape. This is to ensure that a smooth finish is achieved across the entire wall surface. The joint compound & tape can either be applied by hand or you can utilize an automatic taper to enhance your efficiency & speed.
Once you’ve completed applying the joint compound & tape, it’s time to use the drywall flat box. You must know that the drywall flat box comes in various sizes such as 7-inch, 10-inch, 12-inch, and 14-inch. With the help of such flat boxes, you can expect to enjoy a smooth finish on your drywall and the work will be consistent across all the joints. Furthermore, you’ll be able to complete your task in record time without any hassle.
Hence, once you’ve enjoyed using a drywall flat box, the idea of finishing drywall joints manually will become like an age-old thought process.
Why Should You Use A Drywall Flat Box?
The following are some of the major reasons why you should consider using a drywall flat box:
Ability to complete the process of joint finishing easily & quickly.
Performing the finishing process using a drywall flat box is a much easier task than performing the same via hand.
When you’re using a drywall flat box, you don’t have to use plastering stilts or ladders.
Obtain a cleaner & smoother finish on every drywall joint, which you can’t obtain manually.
Ability to save money & time when you have less room for any error.
How Can You Use A Drywall Flat Box?
Using a drywall flat box is very simple. You have to fill the drywall flat box with the joint compound and there’s a slot on its faceplate through which the joint compound is applied. There’s also an adjustable setting though which you can control how much joint compound to release on every application. And that’s pretty much it.
We hope you enjoyed our comprehensive guide and for any additional queries, don’t forget to contact us.
Comments